How to read an insulin syringe (U-100, U-50, U-40)

What the numbers and lines on the barrel mean.

An insulin syringe is a small ruler for liquid. Once you know its scale and how far apart its lines are, reading it is simple. This guide covers the parts that matter for checking a calculator result.

Find the scale first

Every insulin syringe is made for one scale, printed on the barrel or the packaging:

  • U-100 is by far the most common. 100 units fill 1 mL, so each unit is 0.01 mL.
  • U-50 fits 50 units in 1 mL; each unit is 0.02 mL.
  • U-40 fits 40 units in 1 mL; each unit is 0.025 mL.

The same volume reads as a different number on each scale. 0.2 mL is 20 units on U-100, 10 units on U-50 and 8 units on U-40. A units number is only meaningful next to the scale it was calculated for, which is why the dose volume calculator asks which syringe you have.

Then the size

U-100 syringes come in different barrel sizes. All of them use 100 units per mL; they simply hold different amounts:

  • 0.3 mL holds up to 30 units.
  • 0.5 mL holds up to 50 units.
  • 1 mL holds up to 100 units.

Smaller barrels are physically thinner, so the same volume spreads over a longer stretch of barrel. That makes small volumes easier to see.

Reading the lines

Look at the numbers printed along the barrel, usually every 5 or 10 units, and count the small lines between two numbers. That tells you what each small line is worth.

  • On many 0.3 mL and 0.5 mL U-100 syringes, each small line is 1 unit. Some 0.3 mL syringes add half-unit lines.
  • On many 1 mL U-100 syringes, each small line is 2 units, so odd numbers fall between lines.

Do not assume: brands differ. Count the lines on your own syringe. The syringe drawing in our calculators shows a typical layout for illustration only.

Where to read the measurement

The measurement is read at the edge of the plunger's rubber stopper closest to the needle, not at the far end of the stopper and not at the end of the plunger rod. When a calculator says 10 units, that edge should sit on the 10-unit line.

When the result falls between lines

Calculators often give a decimal, for example 7.5 units. What you do with that depends on your syringe:

  • On a syringe with half-unit lines, 7.5 is a line.
  • On a syringe with 1-unit lines, 7.5 is halfway between two lines.
  • On a syringe with 2-unit lines, 7.5 sits between the 6 and 8 lines.

If you regularly land between lines, a smaller syringe with finer marks, or a different set-up that gives a rounder number, may help. Ask whoever gave you your instructions which they prefer. The calculators warn when a result is under 1 unit, because that volume is too small to measure reliably on any insulin syringe, and when a result on a 1 mL syringe falls below its first 2-unit mark.

Checking a calculator result against the syringe

  1. Confirm the syringe scale (U-100, U-50 or U-40) matches the one chosen in the calculator.
  2. Confirm the result is less than the syringe holds. The calculator also warns about this.
  3. Find the nearest printed number below the result and count lines up from it.
  4. Convert the result back to mL as a sense check: on U-100, divide units by 100.

Units are volume, not dose

The single most useful idea in this guide: syringe units measure liquid. How much compound is in each unit depends on the concentration in your vial. The same 10 units can hold very different amounts from different vials. See why the same dose is a different number of units and the units to mL converter.

Arithmetic only. This is educational arithmetic, not medical advice. Check every number against your vial label and your clinician's or pharmacy's instructions.

Try the numbers

More guides

Reminders for every dose, on iPhone

Get Kept